Product was successfully added to your shopping cart.

Products

Products

Set Ascending Direction

   

Items 1 to 50 of 135 total

  1. CNC machined 1/2" steel
  2. Features 3D taper port w/ recess for sch pipe
  3. Features machined cutbacks on gasket side to reduce warpage and promote gasket seal
  4. Fits Nissan SR20
  • Oil return flange with attached -10 AN male fitting.
  • CNC machined billet 6061 aluminum
  • Fits Mitsubishi Evo X oil pan.
  • Regular Price: $25.00

    Special Price $21.25

  • Oil return flange with attached -10 AN male fitting.
  • CNC machined billet 6061 aluminum
  • Fits GT25R, GT28R, GT30R, GT30/40R, GT35R, GT35/40R.
  • Regular Price: $20.00

    Special Price $17.00

     Add to Cart
  • Oil return flange with attached -8 AN male fitting.
  • CNC machined billet 6061 aluminum
  • Fits GT25R, GT28R, GT30R, GT30/40R, GT35R, GT35/40R.
  • Regular Price: $20.00

    Special Price $17.00

     Add to Cart
  • Oil return flange with attached -10 AN male fitting.
  • CNC machined billet 6061 aluminum
  • Fits mitsubish Evo 8/9 and DSM oil drains
  • Regular Price: $20.00

    Special Price $17.00

     Add to Cart
  • Oil return flange with attached -8 AN male fitting.
  • CNC machined billet 6061 aluminum
  • Fits mitsubish Evo 8/9 and DSM oil drains
  • Regular Price: $20.00

    Special Price $17.00

     Add to Cart
  • Oil drain flange w/ built in -10AN male fitting
  • CNC machined billet 6061 aluminum
  • Fits T3, T3/T4, or T04 turbos, also used for larger BB GT40R and GT42R turbos
  • $20.00
     Add to Cart
  • CNC machined 1/2" steel
  • 10mm x 1.5" tapped holes
  • Fits Garrett, PTE, and Borg Warner applications
  • $20.00
     Add to Cart
  • CNC machined 1/2" steel
  • 10mm x 1.5" tapped holes
  • Fits Garrett, PTE, and Borg Warner applications
  • $20.00
     Add to Cart
  • CNC machined 1/2" steel
  • 10mm x 1.5" tapped holes
  • Fits Garrett, PTE, and Borg Warner applications
  • $25.00
     Add to Cart
  • 304 stainless steel
  • Fits Garrett GT28/30/35R v-band (inlet) turbine housings
  • $30.00
     Add to Cart
  • CNC machined 1/2" steel
  • 10mm x 1.5" tapped holes
  • Fits Garrett, PTE, and Borg Warner applications
  • $20.00
     Add to Cart
  • CNC machined 1/2" steel
  • Fits mitsubishi evo 8/9/X turbine housings
  • $20.00
     Add to Cart
  • CNC machined 1/2" steel
  • 6cm to 7cm taper
  • Fits mitsubishi 14b, 16g, 18g, and 20g turbo's
  • $20.00
     Add to Cart
  • 304 stainless steel
  • Fits PTE v-band turbine inlet housings
  • Regular Price: $30.00

    Special Price $22.50

     Add to Cart
  • CNC machined steel
  • 1" OD, .875" ID, 1.5" height, threw hole for 3/8" or 10mm bolt.
  • **Sold individually
  • $3.00
     Add to Cart
  • CNC machined
  • 1" base diameter, 1" tall
  • Drilled and tapped threw
  • ***Sold individually
  • $4.00
    Out of stock
  • CNC machined 6061 aluminum
  • Radiused for 3.5" pipe
  • Complete w/ mounting hardware (screws)
  • Fits Mitsubishi Evo X
  • Regular Price: $35.00

    Special Price $26.25

     Add to Cart
  • CNC machined 1/2" steel
  • Fits Nissan SR20
  • $40.00
     Add to Cart
  • CNC machined 1/2" steel
  • Features 3D taper port w/ recess for 1.5" sch pipe
  • Features machined cutbacks on gasket side to reduce warpage and promote gasket seal
  • Fits Porsche 996/997.1 applications
  • Priced as pair of flanges.
  • $100.00
     Add to Cart
  • CNC machined 1/2"steel
  • Counterbore for 1.5" sch pipe
  • Fits Scion FRS
  • Includes pair(2) of flanges
  • $50.00
     Add to Cart
  • CNC machined 1/2" steel
  • Features 3D taper port w/ recess for 1.25" sch 10 pipe
  • Fits Scion TC
  • $60.00
     Add to Cart
  • CNC machined 1/2" steel
  • Features 3D taper port w/ recess for 1.25" sch 10 pipe
  • Features machined cutbacks on gasket side to reduce warpage and promote gasket seal
  • Fits Scion TC2 2011+
  • $60.00
     Add to Cart
  • CNC machined 1/2"steel
  • Counterbore for 1.5" sch pipe
  • Fits Subaru WRX, STI and BRZ
  • Includes pair(2) of flanges
  • $50.00
     Add to Cart
  • CNC machined 1/2" steel
  • Fits Toyota 2JZGTE
  • $60.00
     Add to Cart
  • CNC machined 1/2" steel
  • Features 3D taper port w/ recess for 1.5" sch 10 pipe
  • Features machined cutbacks on gasket side to reduce warpage and promote gasket seal
  • Fits Toyota 2JZGE
  • $110.00
     Add to Cart
  • CNC machined 1/2" steel
  • Features 3D taper port w/ recess for 1.25" sch 10 pipe
  • Fits Toyota 2JZGTE
  • $110.00
     Add to Cart
  • CNC machined 1/2" steel
  • Features 3D taper port w/ recess for 1.5" sch pipe
  • Features machined cutbacks on gasket side to reduce warpage and promote gasket seal
  • Fits VW/Audi 20V 1.8T
  • $60.00
     Add to Cart
  • CNC machined 6061 aluminum
  • Radiused for 2.75" pipe
  • Complete w/ mounting hardware (screws)
  • Fits Subaru WRX/Sti 02-07, Scion TC 05-06, Lexus IS 300, Mazaspeed 3/6.
  • Regular Price: $35.00

    Special Price $26.25

     Add to Cart
  • CNC machined 6061 aluminum
  • Radiused for 2.75" pipe
  • Complete w/ mounting hardware (screws)
  • Fits Subaru WRX/Sti '08+, Scion TC '07-'10, Civic Si '12+, and other 1" bore Denso MAF sensors.
  • Regular Price: $35.00

    Special Price $26.25

     Add to Cart
  • CNC machined
  • Radiused for 3" pipe
  • Complete w/ mounting hardware (screws)
  • Fits Nissan GTR, Spec-V, Ford Mustang, 2015 Subaru WRX, and GM applications.
  • Regular Price: $35.00

    Special Price $26.25

     Add to Cart
  • CNC machined 6061 aluminum
  • Radiused for 2.75" pipe
  • Complete w/ mounting hardware (screws)
  • Fits Hyundai Genesis 2.0T OEM MAP sensor
  • $25.00
     Add to Cart
  • CNC machined 1/2" steel
  • Counterbore for 2" sch10 pipe
  • Fits Subaru WRX/STi header/up pipe connections
  • Available threaded or non threaded
  • $15.00
     Add to Cart
  • CNC machined 1/2" steel
  • Counterbore for 2" sch10 pipe
  • 10mm x 1.5" tapped holes
  • Fits Subaru WRX/STi stock/oem turbochargers
  • $20.00
     Add to Cart
  • CNC machined 3/4" steel
  • 8mm x1.25" tapped holes
  • Radiused to fit 1.25" sch. pipe
  • Fits T2/T25/T28 applications
  • $35.00
     Add to Cart
  • 1/2" CNC machined steel
  • Fits most 38mm 2 bolt wastegates
  • $12.00
    Out of stock
  • 304 stainless steel
  • Fits TIAL 38mm MVS wastegate
  • $16.00
     Add to Cart
  • 304 stainless steel
  • Fits TIAL 38mm MVS wastegate
  • $15.00
    Out of stock
  • 304 stainless steel
  • Fits TIAL 44 and MVR wastegate
  • Regular Price: $18.00

    Special Price $14.40

     Add to Cart
  • 304 stainless steel
  • Fits TIAL 44 and MVR wastegate
  • $16.00
     Add to Cart
  • CP grade 2 titanium
  • Fits TIAL 44/MVR outlet
  • $50.00
     Add to Cart
  • Evo 8/9 and X turbine inlet weld fixture used as a heat sink reducing warpage during welding
  • CNC machined 6061 aluminum, 1.375" thick
  • Drilled and tapped on both sides w/ threaded 1/8" NPT for back purge plumbing
  • $40.00
    Out of stock
  • CNC machined v-band weld fixture for TIAL or PTE turbine inlet flange.
  • Steel flange ideal for fixture fabrication and aluminum flange ideal for sub assembly welding.
  • Threaded 1/8" NPT for back purge plumbing
  • Machined flats for easy fixture weld points or clamping into a vise.
  • Picture display for multiple side angle display purposes only, price for 1 piece
  • $30.00
    Out of stock
  • T3 turbine inlet weld fixture used as a heat sink reducing warpage during welding
  • CNC machined 6061 aluminum, 1.375" thick
  • Drilled for T3 and divided T3 w/ threaded 1/8" NPT for back purge plumbing
  • $35.00 As low as: $19.25
     Add to Cart
  • T4 turbine inlet weld fixture used as a heat sink reducing warpage during welding
  • CNC machined 6061 aluminum, 1.375" thick
  • Drilled for T4 and divided T4 w/ threaded 1/8" NPT for back purge plumbing
  • $40.00
     Add to Cart
  • CNC machined 6061 v-band weld fixture
  • Threaded 1/8" NPT for back purge plumbing
  • Machined flats for easy fixture weld points or clamping into a vise.
  • Picture display for multiple side angle display purposes only, price for 1 piece
  • Applications for std 3" v-band, PTE, and TIAL turbine outlets.
  • $30.00
    Out of stock
  • CNC machined v-band weld fixture for TIAL MVR/44mm wastegate inlet flange
  • Threaded 1/8" NPT for back purge plumbing
  • Machined flats for easy fixture weld points or clamping into a vise.
  • Picture display for multiple side angle display purposes only, price for 1 piece
  • $20.00
    Out of stock
  • CNC machined v-band weld fixture for TIAL MVR/44mm wastegate outlet flange
  • Threaded 1/8" NPT for back purge plumbing
  • Machined flats for easy fixture weld points or clamping into a vise.
  • Picture display for multiple side angle display purposes only, price for 1 piece
  • $20.00
    Out of stock
  • CNC machined v-band weld fixture for TIAL MVS/38mm wastegate inlet flange
  • Threaded 1/8" NPT for back purge plumbing
  • Machined flats for easy fixture weld points or clamping into a vise.
  • Picture display for multiple side angle display purposes only, price for 1 piece
  • $20.00
    Out of stock
  • 1/2" CNc machined steel
  • Threaded 8mm x 1.25
  • Fits most 38mm 2 bolt wastegates
  • $12.00
    Out of stock
    Set Ascending Direction

       

    Items 1 to 50 of 135 total